Egress Window Requirements for Bedrooms in New York State: What Yonkers Homeowners Need to Know

October 8, 2026 by

A large casement egress window installed in a finished basement bedroom of a brick pre-war home, with fall foliage visible through the glass and a window well outside

Every bedroom in New York State must have at least one window that a person can escape through — or a firefighter can enter — in an emergency. That requirement applies whether you’re finishing a basement, converting an attic, or simply replacing windows in an existing sleeping room. The minimum dimensions come from the 2020 Residential Code of New York State (RCNYS), Section R310, which New York adopted based on the International Residential Code (IRC). Here is what those numbers mean in practice, and where Yonkers homeowners need to pay closest attention.

What the New York State Code Actually Requires

Per RCNYS §R310.1, every bedroom (and any room used for sleeping) must have at least one emergency escape and rescue opening that meets all four of these criteria simultaneously:

Requirement Minimum Value Notes
Net clear opening area 5.7 sq ft Measured when the window is fully open; 5.0 sq ft allowed for openings at or below grade
Net clear opening height 24 in Minimum dimension in the open position
Net clear opening width 20 in Minimum dimension in the open position
Maximum sill height 44 in from floor Measured to the bottom of the opening

“Net clear” means the actual open space you can climb through — not the rough framing or the glass size. A double-hung window that only opens halfway, or one with a built-in security bar, may not meet the net clear requirement even if the glass panel looks large enough. Per RCNYS §R310.1 (per the 2020 RCNYS), the 44-inch sill-height cap ensures a person can reach and open the window without a ladder.

Which Window Types Work Best for Egress

Not every operating style delivers egress efficiently. Here’s how the common types stack up:

Window Type Egress Suitability Notes
Casement (crank-out) Excellent Full opening available; easiest to achieve 5.7 sq ft in a compact frame
Slider (single or double) Good Only one panel moves; effective opening is half the total frame width
Double-hung Good Both sashes open; each contributes, but the lower sash typically does the work
Awning Limited Hinged at top; opening angle limits net clear height, often fails the 24-in threshold
Fixed / picture Not eligible No opening — cannot serve as egress

Casement windows are particularly effective for egress because the entire sash swings open, making it straightforward to achieve the required net clear area even in a narrower rough opening. For below-grade basement bedrooms, window well requirements vary by municipality; confirm with your local building department or historic-district commission.

Why This Matters More in Yonkers Than Many Suburbs

Yonkers’ housing stock includes many pre-war multi-family buildings, two-family homes, and converted basement apartments — particularly in neighborhoods like Park Hill, Nodine Hill, and parts of the southwest waterfront corridor. These older structures were built before modern egress codes existed. When a homeowner finishes a basement room and calls it a bedroom, or a landlord rents a basement unit, the egress requirement kicks in regardless of the building’s age — the code applies to new construction and to any space being put into use as a sleeping room.

The practical result: in Yonkers, window replacements on basement rooms are often not a simple swap. The existing window may be undersized, set into a masonry foundation wall, and require excavation for a proper window well. That’s a materially different project than swapping a double-hung on the second floor — and it requires a permit.

Permits and Local Enforcement

In New York State, permit authority rests with each local government per NYS Executive Law §381 (per the NYS Dept. of State Legal Memorandum LG03). For window work that involves changes to the rough opening size — which egress upgrades almost always do — a building permit is typically required. Requirements vary by municipality; confirm the specific scope with your local building department before starting work.

Gunner handles the permit on every project. If your window replacement involves an opening modification, we pull and manage the permit application — so you’re not navigating that process yourself.

Energy Performance: Don’t Sacrifice Efficiency for Egress

Complying with egress code and meeting energy code are separate requirements, and a window that clears egress still needs to meet thermal performance standards. For Westchester County (Climate Zone 4), the 2020 NYS Energy Conservation Construction Code Table R402.1.2 sets the prescriptive maximum at U-factor ≤ 0.32. If you’re replacing windows in a basement bedroom, the new unit still needs to meet that floor.

For homeowners looking to do better than code minimum, ENERGY STAR v7.0 Northern zone criteria require U-factor ≤ 0.22 (effective October 23, 2023). As an Andersen Certified Elite contractor, Gunner can specify the right configuration for your rough opening size, egress requirement, and energy target.

Before-Winter Timing

Fall is the right time to address basement egress windows in Yonkers. Ground conditions in October are still workable for excavating a window well, and getting the opening sealed and flashed before the first hard freeze matters — an open masonry foundation wall in November is a problem. Window lead times for custom egress-sized units can run several weeks; scheduling now avoids a winter gap.

FAQ

Get a free, no-obligation estimate on egress window replacement or basement window upgrades at GunnerRoofing.com.

Get a fast, free quote

No inspection visit needed - we measure your roof from satellite imagery and send your quote.

This field is required.

Will this project be covered by insurance? *

Are you interested in additional services?

This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

Preferred Contact Method*

This field is required.